Connect with us

Water Filter

gfe28gynfs Water Filter Reset

As an Amazon Associate I earn from qualifying purchases.

Resetting the water filter in your GFE28GYNFS refrigerator is a necessary task that ensures the effectiveness and longevity of your appliance. The water filter plays a pivotal role in removing impurities, thus providing you with clean and safe water for consumption. Over time, the filter saturates, and its efficiency in purifying water decreases, leading to a potential risk of consuming non-purified water. This blog post aims to remove the ambiguity around this process by providing clear, step-by-step instructions on resetting the water filter in your GFE28GYNFS refrigerator, enabling you to maintain an optimal state of health and well-being.

Why Resetting is Necessary

Resetting the water filter is crucial for a few reasons. Firstly, as the water filter works to purify your water, it gradually collects the impurities it filters out. Over time, this build-up can cause the filter to become saturated, and it will no longer be able to filter out impurities adequately. This can result in a noticeable decrease in the quality of your water, impacting both its taste and safety.

Secondly, failing to reset the water filter can negatively impact the performance of your refrigerator’s water dispensing system. A clogged or overly saturated filter can cause the water flow from the dispenser to slow, and in extreme cases, it may even cause the water dispenser to stop working entirely. Furthermore, the clogged filter may force the refrigerator to work harder to pump water, potentially leading to premature wear and tear on the appliance.

Hence, regular resetting of your water filter is key to maintaining the quality of your water and the performance of your appliance.

Safety Precautions

Before resetting your water filter, taking a few safety precautions is essential to ensure a safe and successful procedure.

  1. Turn off the Appliance: Always ensure the refrigerator is turned off and unplugged from the power source. This mitigates any risk of electric shock.
  2.  Use Clean Hands and Tools: Ensure your hands and tools are clean to avoid contaminating the water system.
  3.  Avoid Force: Never force the filter in or out of its slot, as this could damage the filter and the refrigerator. If the filter does not quickly release, re-check the instructions and try again.
  4.  Purchase Approved Filters: Only use water filters approved for your specific appliance model. Using non-approved filters may lead to poor water quality or damage your appliance.

By taking these precautions, you can ensure that the process of resetting your water filter is safe and prosperous, thereby prolonging the lifespan of your appliance and guaranteeing the best quality of water for consumption.

Gather Necessary Tools

To effectively reset your water filter, it’s imperative to have the following tools and materials at your disposal:

  1. Replacement Water Filter: Purchase a water filter compatible with your GFE28GYNFS refrigerator model. It’s advisable to have this at hand before starting the process to avoid any interruptions.
  2.  Clean Cloths: You’ll need clean, dry cloths to wipe out any spillages that may occur during the process.
  3.  Gloves: Although not compulsory, gloves can provide extra grip when handling the water filter, especially if wet.
  4.  Bucket or Bowl: This collects any residual water that may spill out when you remove the old filter.

Ensuring you have these tools and materials ready will facilitate a smooth and efficient resetting process.

Identifying the model (gfe28gynfs)

Before we begin resetting your water filter, it is crucial to confirm your refrigerator model. For GFE28GYNFS, the model number is typically located on the inside of the refrigerator. To find it:

  1. Open the refrigerator’s door.
  2.  Look on the inside edge of the door or along the interior sides of the refrigerator.
  3.  The model number usually appears on a sticker or plate and starts with ‘GFE28GYNFS’.

This step is critical because different models may have different methods of resetting or replacing the water filter and using the wrong procedure could potentially damage your appliance. If your model number differs from ‘GFE28GYNFS’, this guide may not apply to your refrigerator. In that case, refer to the user manual or the manufacturer’s website for specific instructions for your model.

Please note: The model number may vary slightly depending on the model’s specific color or feature variations. However, as long as ‘GFE28GYNFS’ is in the model number, you can proceed with these instructions.

Accessing the Water Filter

The water filter in your GFE28GYNFS refrigerator is conveniently located within the appliance for easy access and maintenance. To identify and safely access the water filter, follow these steps:

  1. Open the right-hand door of your refrigerator. If your model has a double door, open the one on your right.
  2.  Look towards the upper right corner at the back of the refrigerator compartment. You will see the water filter handle. It is cylindrical and usually marked with a water droplet icon or the word ‘Filter.’
  3.  You only need to turn the handle about a quarter counterclockwise to access the water filter. The filter should easily release, allowing you to pull it straight out.

Remember to be gentle during this process. Forcing the filter can cause damage to the appliance. If the filter does not release easily, it’s always best to refer to the user manual or seek professional help to avoid causing unnecessary damage to your refrigerator.

Resetting Process

Once you have safely accessed the water filter, follow these steps to reset it:

  1. Remove the Old Filter: Pull the old filter out of its slot. When you do this, a small amount of water may spill, so be ready with your clean cloth or bucket to wipe or catch any drips.
  2.  Insert the New Filter: Take your new, compatible water filter and push it into the slot where the old filter was. You should easily make the filter in until it clicks into place. When correctly installed, the filter handle should align with the graphic on the filter housing.
  3.  Reset the Filter Indicator: After replacing the filter, reset the filter status. On the GFE28GYNFS model, the water filter reset button is usually on the refrigerator’s control panel. Press and hold the ‘Reset Water Filter’ button for 3 seconds until the status changes from ‘Replace’ to ‘Good’ or the indicator light turns off. This signifies that the refrigerator has recognized the new filter and reset the filter status.
  4. Check for Leaks: After resetting the filter, run water through the dispenser for about 5 minutes to clear the system. This is also an excellent time to check for leaks. Double-check that the filter is correctly installed and fully pushed in if you notice any water dripping or leaking. If the leak persists, you may need to consult a professional.
  5.  Dispose of the Old Filter: Once the new filter is installed and working correctly, you can dispose of the old filter. Many brands have filter recycling programs, so check if this is an option.

Following these steps, you can reset your water filter, ensuring the best possible water quality and optimal refrigerator performance.

Troubleshooting Common Issues

Even with the best preparations, you may encounter issues during the water filter resetting process. Here are some common problems you might face and their corresponding solutions:

Issue: The water filter does not release easily or feels stuck.

Solution: Do not attempt to force the filter out, as it may cause damage to your refrigerator. Instead, try gently wiggling the filter while turning it counterclockwise. If it still needs to be released, it’s best to consult a professional or refer to your user manual.

Issue: The new filter does not click into place.


  1. Ensure that you have the correct replacement filter for your model.
  2. If the filter is compatible but doesn’t seat properly, check for any obstructions in the filter housing.
  3. Remove any debris and try installing the filter again.

Issue: The water dispenser is not working after replacing the filter.

Solution: Check if the filter is installed correctly and fully pushed in. Run the water dispenser for about 5 minutes to clear the air trapped in the system. If the problem persists, it might indicate a faulty new filter.

Issue: After resetting the filter, the ‘Replace’ status or indicator light doesn’t turn off.

Solution: Try pressing and holding the ‘Reset Water Filter’ button for a few seconds longer. If the status still doesn’t change, it might be necessary to unplug the refrigerator, wait a few minutes, and then plug it back in to reset the system.

Remember, if you ever feel unsure or uncomfortable performing these steps, it’s always best to consult a professional or refer to your appliance’s user manual.

Maintenance Tips

Proper maintenance is key to ensuring your water filter functions efficiently and provides clean, safe water. Here are some tips to keep your water filter in top shape:

  1. Regular Replacement: Frequent replacement is the most essential part of maintaining your water filter. For optimal performance, it’s recommended that you replace your water filter every six months or every 300 gallons, whichever comes first. This ensures your water remains clear of contaminants and tastes fresh.
  2.  Regular Checks: Make it a habit to check your water filter regularly for any signs of wear or damage. If the water starts to taste different or the water flow decreases, these might be signs that your filter needs replacement sooner.
  3.  Keep It Clean: While the filter does the heavy lifting, keeping your refrigerator clean can help it do its job more effectively. Regularly clean the area around the water filter to avoid any dirt or debris from entering the filter system.
  4.  Use Genuine Filters: While third-party filters might be cheaper, genuine filters ensure that your water filter fits perfectly and works efficiently. Genuine filters are designed specifically for your refrigerator model and are guaranteed to remove the right contaminants.
  5.  Follow Resetting Instructions: When replacing your water filter, constantly reset the filter status following the instructions. This helps your refrigerator recognize the new filter and ensures the filter indicator works correctly.

Remember, your water quality is directly linked to the care you put into maintaining your water filter. The regular replacement and proper care will ensure your water filter provides clean and safe water.

Conclusion: gfe28gynfs water filter reset

In summary, resetting the water filter in your GFE28GYNFS refrigerator is a clear-cut process involving removing the old filter, inserting the new one, resetting the filter indicator, checking for leaks, and correctly disposing of the old filter. Understanding and swiftly addressing common issues like a stuck filter, improper fitting, or non-functioning water dispenser ensures the smooth running of your refrigerator and guarantees the quality of your water. Remember, regular maintenance is pivotal. Regular filter replacements, checks, cleanliness, utilization of genuine filters, and adherence to resetting instructions are all key factors in maintaining a functional water filter. Take these steps seriously, and always enjoy clean, safe water from your GFE28GYNFS refrigerator. Enjoy a healthier, happier life with these proactive maintenance habits!

For more updates please visit our home page

Amazon and the Amazon logo are trademarks of, Inc, or its affiliates.

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *